You are here
Study Guide
Primary tabs
| Faculty | Engineering |
| School | Mechanical Engineering |
| Qualification Awarded | Δίπλωμα Μηχανολόγου Μηχανικού (Diploma Michanologou Michanikou) (Diploma in Mechanical Engineering) |
| Programme of Study | UPS of School of Mechanical Engineering |
| Cycle / Level | 1st / Undergraduate |
| Academic Year | 2014 - 2015 |
| Status | Active |
| Website | http://www.meng.auth.gr |
| Contact email | info@meng.auth.gr |
| ECTS / Workload | One ECTS unit corresponds to 30 hours of workload. |
Courses of the 1st semester
Core1st semester
6 classes
| Code | Title | ECTS | Type |
|---|---|---|---|
| 101 | CALCULUS I (MATHEMATICS I) | 4 | COR |
| 102 | PHYSICS | 6 | COR |
| 103 | MECHANICAL DRAWING I | 6 | COR |
| 104 | MATERIAL SCIENCE AND TECHNOLOGY I | 6 | COR |
| 181 | ENGLISH I | 6 | FL |
| 185 | GERMAN I | 6 | FL |
Courses of the 2nd semester
Core2nd semester
7 classes
| Code | Title | ECTS | Type |
|---|---|---|---|
| 106 | CALCULUS II (MATHEMATICS II) | 6 | COR |
| 107 | INTRODUCTION TO MANUFACTURING TECHNOLOGY | 6 | COR |
| 108 | STATICS | 6 | COR |
| 109 | MECHANICAL DRAWING II | 6 | COR |
| 115 | ELECTRIC MACHINES - ELECTROTECHNIC | 6 | COR |
| 182 | ENGLISH II | 3 | FL |
| 186 | GERMAN II | 3 | FL |
Courses of the 3rd semester
Core3rd semester
5 classes
| Code | Title | ECTS | Type |
|---|---|---|---|
| 105 | INFORMATICS | 6 | COR |
| 111 | DIFFERENTIAL EQUATIONS (MATHEMATICS III) | 6 | COR |
| 112 | MECHANICS OF MATERIALS | 6 | COR |
| 113 | THERMODYNAMICS I | 6 | COR |
| 114 | STATISTICS | 6 | COR |
Courses of the 4th semester
Core4th semester
5 classes
| Code | Title | ECTS | Type |
|---|---|---|---|
| 116 | DYNAMICS | 6 | COR |
| 117 | MATERIALS SCIENCE AND TECHNOLOGY II | 6 | COR |
| 118 | FLUID MECHANICS I | 6 | COR |
| 120 | NUMERICAL ANALYSIS | 6 | COR |
| 126 | ELECTRONICS | 6 | COR |
Courses of the 5th semester
Core5th semester
5 classes
| Code | Title | ECTS | Type |
|---|---|---|---|
| 119 | MACHINE ELEMENTS I | 6 | COR |
| 122 | HEAT TRANSFER | 6 | COR |
| 123 | MANUFACTURING PROCESSES WITH MATERIAL REMOVAL | 6 | COR |
| 124 | MECHANICAL VIBRATION AND MACHINE DYNAMICS | 6 | COR |
| 125 | OPERATIONS RESEARCH I | 6 | COR |
Courses of the 6th semester
Core6th semester
5 classes
| Code | Title | ECTS | Type |
|---|---|---|---|
| 121 | MACHINE ELEMENTS II | 6 | COR |
| 127 | MECHANICAL ENGINEERING LABORATORY | 6 | COR |
| 128 | ENERGY TRANSFORMING SYSTEMS | 6 | COR |
| 129 | AUTOMATIC CONTROL | 6 | COR |
| 130 | OPERATIONS MANAGEMENT | 6 | COR |
Courses of the 7th semester
Energy7th semester
13 classes
| Code | Title | ECTS | Type |
|---|---|---|---|
| 202 | MACHINE ELEMENT III | 5 | EOS |
| 203 | COMPUTER INTEGRATED MANUFACTURING SYSTEMS (CIM) | 5 | EOS |
| 205 | AERODYNAMICS | 5 | ComSC |
| 206 | PHYSICAL PROCESSES TECHNOLOGY | 5 | ELSC |
| 207 | TURBOMACHINES | 5 | ComSC |
| 208 | MULTIVARIATE STATISTICS | 5 | EOS |
| 209 | PRODUCTION MANAGEMENT | 5 | EOS |
| 211 | ENTREPRENEURSHIP | 5 | EOS |
| 215 | EXPERIMENTAL STRENGTH OF MATERIALS | 5 | EOS |
| 305 | FINITE ELEMENTS METHOD | 5 | EOS |
| 314 | ENERGY RESOURCES MANAGEMENT | 5 | ELSC |
| 327 | INVENTORY MANAGEMENT | 5 | EOS |
| 379 | ADVANCED CONTROLS OF STRUCTURAL DYNAMICS | 5 | EOS |
Design and Structures7th semester
13 classes
| Code | Title | ECTS | Type |
|---|---|---|---|
| 202 | MACHINE ELEMENT III | 5 | ComSC |
| 203 | COMPUTER INTEGRATED MANUFACTURING SYSTEMS (CIM) | 5 | ComSC |
| 205 | AERODYNAMICS | 5 | EOS |
| 206 | PHYSICAL PROCESSES TECHNOLOGY | 5 | EOS |
| 207 | TURBOMACHINES | 5 | EOS |
| 208 | MULTIVARIATE STATISTICS | 5 | EOS |
| 209 | PRODUCTION MANAGEMENT | 5 | EOS |
| 211 | ENTREPRENEURSHIP | 5 | EOS |
| 215 | EXPERIMENTAL STRENGTH OF MATERIALS | 5 | ELSC |
| 305 | FINITE ELEMENTS METHOD | 5 | ELSC |
| 314 | ENERGY RESOURCES MANAGEMENT | 5 | EOS |
| 327 | INVENTORY MANAGEMENT | 5 | EOS |
| 379 | ADVANCED CONTROLS OF STRUCTURAL DYNAMICS | 5 | ComSC |
Industrial Management7th semester
13 classes
| Code | Title | ECTS | Type |
|---|---|---|---|
| 202 | MACHINE ELEMENT III | 5 | EOS |
| 203 | COMPUTER INTEGRATED MANUFACTURING SYSTEMS (CIM) | 5 | EOS |
| 205 | AERODYNAMICS | 5 | EOS |
| 206 | PHYSICAL PROCESSES TECHNOLOGY | 5 | EOS |
| 207 | TURBOMACHINES | 5 | EOS |
| 208 | MULTIVARIATE STATISTICS | 5 | ComSC |
| 209 | PRODUCTION MANAGEMENT | 5 | ComSC |
| 211 | ENTREPRENEURSHIP | 5 | ELSC |
| 215 | EXPERIMENTAL STRENGTH OF MATERIALS | 5 | EOS |
| 305 | FINITE ELEMENTS METHOD | 5 | EOS |
| 314 | ENERGY RESOURCES MANAGEMENT | 5 | EOS |
| 327 | INVENTORY MANAGEMENT | 5 | ELSC |
| 379 | ADVANCED CONTROLS OF STRUCTURAL DYNAMICS | 5 | EOS |
Courses of the 8th semester
Energy8th semester
16 classes
| Code | Title | ECTS | Type |
|---|---|---|---|
| 204 | MATERIALS SELECTION AND FAILURE | 5 | EOS |
| 210 | MANAGEMENT INFORMATION SYSTEMS | 5 | EOS |
| 212 | MANUFACTURING PROCESSES WITH PLASTIC DEFORMATION | 5 | EOS |
| 213 | ANALYSIS AND SYNTHESIS OF MECHANISMS | 5 | EOS |
| 214 | STRUCTURAL DYNAMICS | 5 | EOS |
| 216 | THERMODYNAMICS II | 5 | ComSC |
| 217 | HEATING - REFRIGERATION - AIR CONDITIONING | 5 | ComSC |
| 218 | ENVIRONMENTAL PROTECTION ENGINEERING | 5 | ComSC |
| 219 | INTERNAL COMBUSTION ENGINES I | 5 | ComSC |
| 221 | OPERATIONS RESEARCH II | 5 | EOS |
| 222 | PRODUCTION PLANNING AND CONTROL | 5 | EOS |
| 223 | QUALITY CONTROL METHODS AND MANAGEMENT | 5 | EOS |
| 333 | CORROSION AND PROTECTION OF MATERIALS | 5 | ELSC |
| 349 | RENEWABLE ENERGY SOURCES | 5 | ELSC |
| 365 | SUPPLY CHAIN MANAGEMENT | 5 | EOS |
| 369 | MECHANICAL BEHAVIOR AND FATIGUE | 5 | EOS |
Design and Structures8th semester
16 classes
| Code | Title | ECTS | Type |
|---|---|---|---|
| 204 | MATERIALS SELECTION AND FAILURE | 5 | ComSC |
| 210 | MANAGEMENT INFORMATION SYSTEMS | 5 | EOS |
| 212 | MANUFACTURING PROCESSES WITH PLASTIC DEFORMATION | 5 | ComSC |
| 213 | ANALYSIS AND SYNTHESIS OF MECHANISMS | 5 | ELSC |
| 214 | STRUCTURAL DYNAMICS | 5 | ComSC |
| 216 | THERMODYNAMICS II | 5 | EOS |
| 217 | HEATING - REFRIGERATION - AIR CONDITIONING | 5 | EOS |
| 218 | ENVIRONMENTAL PROTECTION ENGINEERING | 5 | EOS |
| 219 | INTERNAL COMBUSTION ENGINES I | 5 | EOS |
| 221 | OPERATIONS RESEARCH II | 5 | EOS |
| 222 | PRODUCTION PLANNING AND CONTROL | 5 | EOS |
| 223 | QUALITY CONTROL METHODS AND MANAGEMENT | 5 | EOS |
| 333 | CORROSION AND PROTECTION OF MATERIALS | 5 | ComSC |
| 349 | RENEWABLE ENERGY SOURCES | 5 | EOS |
| 365 | SUPPLY CHAIN MANAGEMENT | 5 | EOS |
| 369 | MECHANICAL BEHAVIOR AND FATIGUE | 5 | ComSC |
Industrial Management8th semester
16 classes
| Code | Title | ECTS | Type |
|---|---|---|---|
| 204 | MATERIALS SELECTION AND FAILURE | 5 | EOS |
| 210 | MANAGEMENT INFORMATION SYSTEMS | 5 | ELSC |
| 212 | MANUFACTURING PROCESSES WITH PLASTIC DEFORMATION | 5 | EOS |
| 213 | ANALYSIS AND SYNTHESIS OF MECHANISMS | 5 | EOS |
| 214 | STRUCTURAL DYNAMICS | 5 | EOS |
| 216 | THERMODYNAMICS II | 5 | EOS |
| 217 | HEATING - REFRIGERATION - AIR CONDITIONING | 5 | EOS |
| 218 | ENVIRONMENTAL PROTECTION ENGINEERING | 5 | EOS |
| 219 | INTERNAL COMBUSTION ENGINES I | 5 | EOS |
| 221 | OPERATIONS RESEARCH II | 5 | ComSC |
| 222 | PRODUCTION PLANNING AND CONTROL | 5 | ComSC |
| 223 | QUALITY CONTROL METHODS AND MANAGEMENT | 5 | ComSC |
| 333 | CORROSION AND PROTECTION OF MATERIALS | 5 | ELSC |
| 349 | RENEWABLE ENERGY SOURCES | 5 | EOS |
| 365 | SUPPLY CHAIN MANAGEMENT | 5 | ELSC |
| 369 | MECHANICAL BEHAVIOR AND FATIGUE | 5 | EOS |
Courses of the 9th semester
Energy9th semester
15 classes
| Code | Title | ECTS | Type |
|---|---|---|---|
| 315 | THERMAL TURBOMACHINERY | 5 | ComSC |
| 316 | INTERNAL COMBUSTION ENGINES II | 5 | ComSC |
| 318 | POLLUTION CONTROL TECHNOLOGY FOR STATIONARY SOURCES | 5 | ComSC |
| 319 | ENVIRONMENTAL MANAGEMENT | 5 | ComSC |
| 321 | GREENHOUSE GAS REDUCTION TECHNOLOGIES IN TRANSPORT (POLLUTION SOURCES) | 5 | ELSC |
| 322 | ENVIRONMENTAL CHEMISTRY AND BIOLOGY | 5 | ELSC |
| 323 | NUMERICAL OPTIMIZATION OF MECHANICAL STRUCTURES AND PROCESSES | 5 | ELSC |
| 332 | INVESTMENT PLANNING AND ANALYSIS | 5 | ELSC |
| 351 | ADVANCED FLUID MECHANICS | 5 | ELSC |
| 360 | NUMERICAL METHODS IN VIBRATION | 5 | ELSC |
| 363 | ENERGY AND ENVIRONMENTAL PERFORMANCE OF BUILDINGS | 5 | ComSC |
| 366 | HEATING | 5 | ComSC |
| 378 | ENVIRONMENTAL INFORMATICS | 5 | ELSC |
| 390 | INTERNAL COMBUSTION ENGINES LABORATORY | 5 | ELSC |
| 397-09 | PRACTICAL EXERCISE | 12 | PRT |
Design and Structures9th semester
21 classes
| Code | Title | ECTS | Type |
|---|---|---|---|
| 301 | SCIENCE AND TECHNOLOGY OF WELDING (CASTING - WELDING) | 5 | ComSC |
| 302 | EXPERIMENTAL METHODS FOR THE STUDY OF MATERIALS | 5 | ELSC |
| 308 | MACHINE TOOLS | 5 | ELSC |
| 309 | METROLOGY AND QUALITY CONTROL | 5 | ComSC |
| 310 | NUMERICAL CONTROL OF MACHINE TOOLS | 5 | ELSC |
| 311 | NUMERICAL METHODS FOR SIMULATING MANUFACTURING PROCESSES | 5 | ComSC |
| 315 | THERMAL TURBOMACHINERY | 5 | ELSC |
| 316 | INTERNAL COMBUSTION ENGINES II | 5 | ELSC |
| 323 | NUMERICAL OPTIMIZATION OF MECHANICAL STRUCTURES AND PROCESSES | 5 | ComSC |
| 329 | SYSTEM DYNAMICS | 5 | ELSC |
| 336 | TECHNOLOGY OF ADVANCED MATERIALS | 5 | ComSC |
| 345 | DIAGNOSTIC CONTROL OF MACHINE TOOLS | 5 | ELSC |
| 346 | SPECIAL TOPICS ON FLEXIBLE MANUFACTURING SYSTEMS | 5 | ELSC |
| 351 | ADVANCED FLUID MECHANICS | 5 | ELSC |
| 360 | NUMERICAL METHODS IN VIBRATION | 5 | ComSC |
| 370 | INTODUCTION TO MECHATRONICS | 5 | ELSC |
| 373 | VEHICLE ANALYSIS AND DESIGN | 5 | ELSC |
| 374 | BIOENGINEERING | 5 | ELSC |
| 376 | MATERIALS AND ENVIRONMENT | 5 | ELSC |
| 378 | ENVIRONMENTAL INFORMATICS | 5 | ELSC |
| 397-09 | PRACTICAL EXERCISE | 12 | PRT |
Industrial Management9th semester
6 classes
| Code | Title | ECTS | Type |
|---|---|---|---|
| 323 | NUMERICAL OPTIMIZATION OF MECHANICAL STRUCTURES AND PROCESSES | 5 | ELSC |
| 328 | RELIABILITY AND MAINTENANCE | 5 | ELSC |
| 329 | SYSTEM DYNAMICS | 5 | ComSC |
| 330 | HUMAN RESOURCE MANAGEMENT | 5 | ELSC |
| 356 | PROJECT MANAGEMENT | 5 | ComSC |
| 397-09 | PRACTICAL EXERCISE | 12 | PRT |
Courses of the 10th semester
Energy10th semester
13 classes
| Code | Title | ECTS | Type |
|---|---|---|---|
| 320 | SOLID WASTE TREATMENT AND MANAGEMENT | 5 | ComSC |
| 326 | MEASURING TECHNIQUES IN FLUID MECHANICS | 5 | ELSC |
| 347 | COMBUSTION | 5 | ComSC |
| 348 | PRESSURE INSTALLATIONS AND MAINS (PHYSICAL PROCESSES TECHNOLOGY IΙ) | 5 | ComSC |
| 350 | ENERGY AND ENVIRONMENTAL ECONOMICS | 5 | ELSC |
| 352 | AIR POLLUTION | 5 | ComSC |
| 353 | INVESTIGATION OF ENVIRONMENTAL EFFECTS | 5 | ELSC |
| 355 | COMPUTATIONAL FLUIDS DYNAMICS | 5 | ComSC |
| 367 | AIR CONDITIONING | 5 | ELSC |
| 377 | OPTIMAL CONTROL OF DYNAMICS SYSTEMS | 5 | ELSC |
| 387 | AEROENGINE TECHNOLOGY | 5 | ELSC |
| 389 | AERODYNAMIC DESIGN AND CONTROL OF AIRCRAFTS | 5 | ELSC |
| 397-10 | PRACTICAL EXERCISE | 12 | PRT |
Design and Structures10th semester
16 classes
| Code | Title | ECTS | Type |
|---|---|---|---|
| 303 | TRIBOLOGY | 5 | ELSC |
| 312 | SPATIAL MECHANISMS-INDUSTRIAL ROBOTS | 5 | ELSC |
| 334 | HEAT TREATMENTS AND PHASE TRANSFORMATIONS | 5 | ComSC |
| 337 | COATING APPLICATIONS IN MANUFACTURING | 5 | ComSC |
| 344 | GEAR MANUFACTURING PROCESSES | 5 | ELSC |
| 347 | COMBUSTION | 5 | ELSC |
| 352 | AIR POLLUTION | 5 | ELSC |
| 355 | COMPUTATIONAL FLUIDS DYNAMICS | 5 | ELSC |
| 361 | EXPERIMENTAL METHODS IN VIBRATION | 5 | ELSC |
| 364 | SIMULATION | 5 | ELSC |
| 368 | REVERSE ENGINEERING AND RAPID PROTOTYPING METHODS | 5 | ComSC |
| 375 | SMART MATERIALS-NANOTECHNOLOGY | 5 | ComSC |
| 377 | OPTIMAL CONTROL OF DYNAMICS SYSTEMS | 5 | ComSC |
| 387 | AEROENGINE TECHNOLOGY | 5 | ELSC |
| 389 | AERODYNAMIC DESIGN AND CONTROL OF AIRCRAFTS | 5 | ELSC |
| 397-10 | PRACTICAL EXERCISE | 12 | PRT |
Industrial Management10th semester
7 classes
| Code | Title | ECTS | Type |
|---|---|---|---|
| 224 | BUSINESS ECONOMICS | 5 | ComSC |
| 331 | INNOVATION AND TECHNOLOGY MANAGEMENT | 5 | ELSC |
| 357 | FORECASTING TECHNIQUES | 5 | ELSC |
| 358 | MARKETING AND COMMUNICATION | 5 | ELSC |
| 359 | INDUSTRIAL INFORMATICS | 5 | ELSC |
| 364 | SIMULATION | 5 | ComSC |
| 397-10 | PRACTICAL EXERCISE | 12 | PRT |
