Faculty | Engineering |
School | Mechanical Engineering |
Qualification Awarded | Δίπλωμα Μηχανολόγου Μηχανικού (Diploma Michanologou Michanikou) (Diploma in Mechanical Engineering) |
Programme of Study | UPS of School of Mechanical Engineering |
Cycle / Level | 1st / Undergraduate |
Academic Year | 2022 - 2023 |
Status | Active |
Website | http://www.meng.auth.gr |
Contact email | students@meng.auth.gr |
ECTS / Workload | One ECTS unit corresponds to 30 hours of workload. |
Code | Title | ECTS | Type |
---|---|---|---|
101 | CALCULUS I (MATHEMATICS I) | 4 | COR |
102 | PHYSICS | 6 | COR |
103 | MECHANICAL DRAWING I | 6 | COR |
104 | MATERIAL SCIENCE AND TECHNOLOGY I | 6 | COR |
131 | LINEAR ALGEBRA | 4 | COR |
132 | CHEMISTRY | 4 | COR |
Code | Title | ECTS | Type |
---|---|---|---|
105 | INFORMATICS | 6 | COR |
106 | CALCULUS II (MATHEMATICS II) | 6 | COR |
107 | INTRODUCTION TO MANUFACTURING TECHNOLOGY | 6 | COR |
108 | STATICS | 6 | COR |
109 | MECHANICAL DRAWING II | 6 | COR |
115 | ELECTRIC MACHINES - ELECTROTECHNIC | 6 | COR |
Code | Title | ECTS | Type |
---|---|---|---|
111 | DIFFERENTIAL EQUATIONS (MATHEMATICS III) | 6 | COR |
112 | MECHANICS OF MATERIALS | 6 | COR |
113 | THERMODYNAMICS I | 6 | COR |
114 | STATISTICS | 6 | COR |
123 | MANUFACTURING PROCESSES WITH MATERIAL REMOVAL | 6 | COR |
Code | Title | ECTS | Type |
---|---|---|---|
116 | DYNAMICS | 6 | COR |
117 | MATERIALS SCIENCE AND TECHNOLOGY II | 6 | COR |
118 | FLUID MECHANICS I | 6 | COR |
120 | NUMERICAL ANALYSIS | 6 | COR |
126 | ELECTRONICS | 6 | COR |
Code | Title | ECTS | Type |
---|---|---|---|
119 | MACHINE ELEMENTS I | 6 | COR |
122 | HEAT TRANSFER | 6 | COR |
124 | MECHANICAL VIBRATION AND MACHINE DYNAMICS | 6 | COR |
125 | OPERATIONS RESEARCH I | 6 | COR |
216 | THERMODYNAMICS II | 6 | COR |
Code | Title | ECTS | Type |
---|---|---|---|
121 | MACHINE ELEMENTS II | 6 | COR |
127 | MECHANICAL ENGINEERING LABORATORY | 6 | COR |
128 | ENERGY TRANSFORMING SYSTEMS | 6 | COR |
129 | AUTOMATIC CONTROL | 6 | COR |
130 | OPERATIONS MANAGEMENT | 6 | COR |
351 | ADVANCED FLUID MECHANICS | 6 | COR |
Code | Title | ECTS | Type |
---|---|---|---|
202 | MACHINE ELEMENT III | 5 | EOS |
203 | COMPUTER INTEGRATED MANUFACTURING SYSTEMS (CIM) | 5 | EOS |
205 | AERODYNAMICS | 5 | ComSC |
207 | TURBOMACHINES | 5 | ComSC |
208 | MULTIVARIATE STATISTICS | 5 | EOS |
209 | PRODUCTION MANAGEMENT | 5 | EOS |
211 | ENTREPRENEURSHIP | 5 | EOS |
215 | EXPERIMENTAL STRENGTH OF MATERIALS | 5 | EOS |
219 | INTERNAL COMBUSTION ENGINES I | 5 | ComSC |
221 | OPERATIONS RESEARCH II | 5 | EOS |
305 | FINITE ELEMENTS METHOD | 5 | EOS |
327 | INVENTORY MANAGEMENT | 5 | EOS |
349 | RENEWABLE ENERGY SOURCES | 5 | ELSC |
379 | ADVANCED CONTROLS OF STRUCTURAL DYNAMICS | 5 | EOS |
Code | Title | ECTS | Type |
---|---|---|---|
202 | MACHINE ELEMENT III | 5 | ComSC |
203 | COMPUTER INTEGRATED MANUFACTURING SYSTEMS (CIM) | 5 | ComSC |
205 | AERODYNAMICS | 5 | EOS |
207 | TURBOMACHINES | 5 | EOS |
208 | MULTIVARIATE STATISTICS | 5 | EOS |
209 | PRODUCTION MANAGEMENT | 5 | EOS |
211 | ENTREPRENEURSHIP | 5 | EOS |
215 | EXPERIMENTAL STRENGTH OF MATERIALS | 5 | ELSC |
219 | INTERNAL COMBUSTION ENGINES I | 5 | EOS |
221 | OPERATIONS RESEARCH II | 5 | EOS |
305 | FINITE ELEMENTS METHOD | 5 | ELSC |
327 | INVENTORY MANAGEMENT | 5 | EOS |
349 | RENEWABLE ENERGY SOURCES | 5 | EOS |
379 | ADVANCED CONTROLS OF STRUCTURAL DYNAMICS | 5 | ComSC |
Code | Title | ECTS | Type |
---|---|---|---|
202 | MACHINE ELEMENT III | 5 | EOS |
203 | COMPUTER INTEGRATED MANUFACTURING SYSTEMS (CIM) | 5 | EOS |
205 | AERODYNAMICS | 5 | EOS |
207 | TURBOMACHINES | 5 | EOS |
208 | MULTIVARIATE STATISTICS | 5 | ComSC |
209 | PRODUCTION MANAGEMENT | 5 | ComSC |
211 | ENTREPRENEURSHIP | 5 | ELSC |
215 | EXPERIMENTAL STRENGTH OF MATERIALS | 5 | EOS |
219 | INTERNAL COMBUSTION ENGINES I | 5 | EOS |
221 | OPERATIONS RESEARCH II | 5 | ELSC |
305 | FINITE ELEMENTS METHOD | 5 | EOS |
327 | INVENTORY MANAGEMENT | 5 | ComSC |
349 | RENEWABLE ENERGY SOURCES | 5 | EOS |
379 | ADVANCED CONTROLS OF STRUCTURAL DYNAMICS | 5 | EOS |
Code | Title | ECTS | Type |
---|---|---|---|
204 | MATERIALS SELECTION AND FAILURE | 5 | EOS |
206 | PHYSICAL PROCESSES TECHNOLOGY | 5 | ELSC |
210 | MANAGEMENT INFORMATION SYSTEMS | 5 | EOS |
212 | MANUFACTURING PROCESSES WITH PLASTIC DEFORMATION | 5 | EOS |
213 | ANALYSIS AND SYNTHESIS OF MECHANISMS | 5 | EOS |
214 | STRUCTURAL DYNAMICS | 5 | EOS |
217 | HEATING - REFRIGERATION - AIR CONDITIONING | 5 | ComSC |
218 | SUSTAINABILITY ENGINEERING (ENVIRONMENTAL PROTECTION ENGINEERING) | 5 | ComSC |
222 | PRODUCTION PLANNING AND CONTROL | 5 | EOS |
223 | QUALITY CONTROL METHODS AND MANAGEMENT | 5 | EOS |
226 | HEAT AND MASS TRANSPORT PHENOMENA | 5 | ELSC |
227 | APPLIED NON-LINEAR DYNAMICS SYSTEMS | 5 | EOS |
228 | DATA ANALYSIS | 5 | EOS |
333 | CORROSION AND PROTECTION OF MATERIALS | 5 | ELSC |
365 | SUPPLY CHAIN MANAGEMENT | 5 | EOS |
369 | MECHANICAL BEHAVIOR AND FATIGUE | 5 | EOS |
387 | AEROENGINE TECHNOLOGY | 5 | COR |
Code | Title | ECTS | Type |
---|---|---|---|
204 | MATERIALS SELECTION AND FAILURE | 5 | ComSC |
206 | PHYSICAL PROCESSES TECHNOLOGY | 5 | EOS |
210 | MANAGEMENT INFORMATION SYSTEMS | 5 | EOS |
212 | MANUFACTURING PROCESSES WITH PLASTIC DEFORMATION | 5 | ComSC |
213 | ANALYSIS AND SYNTHESIS OF MECHANISMS | 5 | ELSC |
214 | STRUCTURAL DYNAMICS | 5 | ComSC |
217 | HEATING - REFRIGERATION - AIR CONDITIONING | 5 | EOS |
218 | SUSTAINABILITY ENGINEERING (ENVIRONMENTAL PROTECTION ENGINEERING) | 5 | EOS |
222 | PRODUCTION PLANNING AND CONTROL | 5 | EOS |
223 | QUALITY CONTROL METHODS AND MANAGEMENT | 5 | EOS |
226 | HEAT AND MASS TRANSPORT PHENOMENA | 5 | EOS |
227 | APPLIED NON-LINEAR DYNAMICS SYSTEMS | 5 | ELSC |
228 | DATA ANALYSIS | 5 | EOS |
333 | CORROSION AND PROTECTION OF MATERIALS | 5 | ComSC |
365 | SUPPLY CHAIN MANAGEMENT | 5 | EOS |
369 | MECHANICAL BEHAVIOR AND FATIGUE | 5 | ComSC |
Code | Title | ECTS | Type |
---|---|---|---|
204 | MATERIALS SELECTION AND FAILURE | 5 | EOS |
206 | PHYSICAL PROCESSES TECHNOLOGY | 5 | EOS |
210 | MANAGEMENT INFORMATION SYSTEMS | 5 | ELSC |
212 | MANUFACTURING PROCESSES WITH PLASTIC DEFORMATION | 5 | EOS |
213 | ANALYSIS AND SYNTHESIS OF MECHANISMS | 5 | EOS |
214 | STRUCTURAL DYNAMICS | 5 | EOS |
217 | HEATING - REFRIGERATION - AIR CONDITIONING | 5 | EOS |
218 | SUSTAINABILITY ENGINEERING (ENVIRONMENTAL PROTECTION ENGINEERING) | 5 | EOS |
222 | PRODUCTION PLANNING AND CONTROL | 5 | ELSC |
223 | QUALITY CONTROL METHODS AND MANAGEMENT | 5 | ComSC |
226 | HEAT AND MASS TRANSPORT PHENOMENA | 5 | EOS |
227 | APPLIED NON-LINEAR DYNAMICS SYSTEMS | 5 | EOS |
228 | DATA ANALYSIS | 5 | ComSC |
333 | CORROSION AND PROTECTION OF MATERIALS | 5 | ELSC |
365 | SUPPLY CHAIN MANAGEMENT | 5 | ELSC |
369 | MECHANICAL BEHAVIOR AND FATIGUE | 5 | EOS |
387 | AEROENGINE TECHNOLOGY | 5 | EOS |
Code | Title | ECTS | Type |
---|---|---|---|
314 | ENERGY RESOURCES MANAGEMENT | 5 | ELSC |
315 | THERMAL TURBOMACHINERY | 5 | ELSC |
319 | ENVIRONMENTAL MANAGEMENT | 5 | ELSC |
322 | ENVIRONMENTAL CHEMISTRY AND BIOLOGY | 5 | ELSC |
323 | NUMERICAL OPTIMIZATION OF MECHANICAL STRUCTURES AND PROCESSES | 5 | ELSC |
347 | COMBUSTION - ELECTROCHEMISTRY (COMBUSTION) | 5 | ELSC |
352 | AIR POLLUTION | 5 | ELSC |
355 | COMPUTATIONAL FLUIDS DYNAMICS | 5 | ELSC |
360 | NUMERICAL METHODS IN VIBRATION | 5 | ELSC |
363 | ENERGY AND ENVIRONMENTAL PERFORMANCE OF BUILDINGS | 5 | ELSC |
366 | HEATING | 5 | ELSC |
378 | ENVIRONMENTAL INFORMATICS | 5 | ELSC |
390 | INTERNAL COMBUSTION ENGINES LABORATORY | 5 | ELSC |
397-09 | PRACTICAL EXERCISE | 12 | PRT |
Code | Title | ECTS | Type |
---|---|---|---|
314 | ENERGY RESOURCES MANAGEMENT | 5 | ELSC |
319 | ENVIRONMENTAL MANAGEMENT | 5 | ELSC |
323 | NUMERICAL OPTIMIZATION OF MECHANICAL STRUCTURES AND PROCESSES | 5 | ELSC |
328 | RELIABILITY AND MAINTENANCE | 5 | ELSC |
329 | SYSTEM DYNAMICS | 5 | ComSC |
330 | HUMAN RESOURCE MANAGEMENT | 5 | ELSC |
356 | PROJECT MANAGEMENT | 5 | ComSC |
378 | ENVIRONMENTAL INFORMATICS | 5 | ELSC |
397-09 | PRACTICAL EXERCISE | 12 | PRT |
Code | Title | ECTS | Type |
---|---|---|---|
303 | TRIBOLOGY | 5 | ELSC |
312 | SPATIAL MECHANISMS-INDUSTRIAL ROBOTS | 5 | ELSC |
316 | INTERNAL COMBUSTION ENGINES II | 5 | ELSC |
334 | HEAT TREATMENTS AND PHASE TRANSFORMATIONS | 5 | ComSC |
337 | COATING APPLICATIONS IN MANUFACTURING | 5 | ComSC |
338 | ELEVATING AND CONVEYING MACHINES | 5 | ELSC |
340 | LIGHT STRUCTURES | 5 | ELSC |
342 | METHOD OF BOUNDARY FINITE ELEMENTS | 5 | ComSC |
344 | GEAR MANUFACTURING PROCESSES | 5 | ELSC |
361 | EXPERIMENTAL METHODS IN VIBRATION | 5 | ELSC |
364 | SIMULATION | 5 | ELSC |
368 | REVERSE ENGINEERING AND RAPID PROTOTYPING METHODS | 5 | ComSC |
375 | SMART MATERIALS-NANOTECHNOLOGY | 5 | ComSC |
377 | OPTIMAL CONTROL OF DYNAMICS SYSTEMS | 5 | ComSC |
387 | AEROENGINE TECHNOLOGY | 5 | EOS |
389 | AERODYNAMIC DESIGN AND CONTROL OF AIRCRAFTS | 5 | ELSC |
392 | COMPOSITE MATERIALS | 5 | ELSC |
395 | ANALYSIS OF WELDED STRUCTURES | 5 | ComSC |
396 | COMPUTATIONAL DYNAMICS OF DEFORMABLE BODIES | 5 | ComSC |
397-10 | PRACTICAL EXERCISE | 12 | PRT |
Code | Title | ECTS | Type |
---|---|---|---|
224 | BUSINESS ECONOMICS | 5 | ELSC |
325 | WASTE TREATMENT AND CIRCULAR ECONOMY (SUSTAINABILITY MANAGEMENT AND CIRCULAR ECONOMY) | 5 | ELSC |
331 | INNOVATION AND TECHNOLOGY MANAGEMENT | 5 | ELSC |
357 | FORECASTING TECHNIQUES | 5 | ELSC |
358 | MARKETING AND COMMUNICATION | 5 | ELSC |
359 | INDUSTRIAL INFORMATICS | 5 | ELSC |
364 | SIMULATION | 5 | ComSC |
397-10 | PRACTICAL EXERCISE | 12 | PRT |